Home » Engraver Machine » The different techniques of laser cutting

The different techniques of laser cutting

There are several different machine tools for cutting metal plates. The most important techniques are plasma, water jet or laser. Each technique has specific advantages, depending on the application. However, when it comes to cutting sculpted contours and precise shapes, laser cutting represents the best solution. It also provides a good alternative to milling. Below, we will find out more about the different types of techniques that you can use in a laser engraver machine.

  • First, let’s understand the main advantages of laser cutting:
  • minimum thermal effort
  • very precise shapes, even in thicker material
  • precise cut
  • excellent repeatability thanks to the fact that there is no wear on the cutting tool
  • easy reanalysis

The different techniques of laser cutting

Beveling

With regard to bevelling, CO2 laser engraver and fiber cutting are both more accurate than plasma jet cutting, and faster than milling. A good CO2 laser engraver, for example, allows you to bevel ends up to 40 mm – the perfect solution for cutting steel sheets, for example.

Complex shapes and very small grooves

A good CO2 laser engraver enables you to cut complex shapes and reduced grooves up to a fraction of a millimeter.

Make sure you know the differences before picking your machine

When you have to opt for a laser engraver, it is essential to receive adequate support through the advice and experience of the specialists. What is your opinion regarding the integration of laser equipment into your machine? Is it supplied with the appropriate machining software and meets all cutting requirements for a wide range of materials? And why not set it and calibrate it? If it is starting from scratch, we recommend that you contact a qualified technician.

High Speed Recording / Marking

A laser machine that marks, engraves and cuts. It does not require two machines or transfer parts between them, and this inherent versatility further reduces costs per part.

Non-Metallic Materials

The laser engraver is ideal for cutting wood, plastic and Perspex. Provides a superb finish of Perspex ends, cuts plywood and can be used to punch paper and cardboard. As a versatile and economical method, laser cutting represents an excellent solution for suppliers in the communications and advertising industries. Learn more.

Simple re-updating

It is easy to achieve greater productivity with older or specialized machines by adding loading solutions, simply replace the laser system. The availability of ready-to-use solutions means you do not need to create your own configuration from multiple products. Dealing with any laser engraver is usually quite simple, so all you need to figure out is the kind of machine you need.

The alternative to milling: oxide-free cutting

The co2 laser engraver cut cleanly without leaving oxides of residue on the work piece. For this reason, the use of a co2 laser engraver is an excellent alternative to milling in stainless steel parts that require an exceptional finish. Given the additional productivity resulting from its speed, it makes sense to seek advice on the pros and cons of laser cutting as an alternative to milling.