Home » Posts tagged laser cutter

CO2 Laser Engraver Safety

From the main laser engraver (and their precursors the MASERs) to the present laser cutting, there’s a significant intriguing history of preliminaries and blunders, rejection and disclosures. To comprehend somewhat better what’s behind our new laser cutting administration, take this recorded voyage with us.

From MASERs to co2 laser engraver

Amid World War II, the physicist Charles Townes worked at the Bell Laboratories on the radar helped shelling frameworks and microwaves generators. During the 50’s, after an Einstein hypothesis, invigorated outflow, where vitality is removed from a progress in a particle or atom, Townes pondered making a photon motion, all similar, because of the enhancement of an attractive wave.

That is the way he made the main gadget, called Microwaves Amplification by Stimulated Emission of Radiation, for example “MASER”. Masers were unobtrusively helpful, for logical research essentially however less for military or modern applications. Just a couple of researchers figured an infrared maser may be significant.

The employments of laser cutting, at that point and now

The Western Engineering Research Center, in Buffalo, USA, was the absolute initial one to utilize a laser as a cutting gadget. As of now, jewel kicks the bucket were utilized to produce wire for electrical associations. Thousands of kicks the bucket were required for this sort of activities, and penetrating the bites the dust or resizing them was both an expensive and a moderate procedure, as long as 24 hours of making.

Rather than metal drill or jewel dust, utilized up until this point, engineers utilized a laser. Huge numbers of the directed tests were wellbeing trying. The impacts of laser bars on eyes and skin, or of the vaporized materials on the specialist’s wellbeing had not yet been built up.

Gas helped laser cutting, and particularly co2 laser engraver cutting implied an expanded productivity, which permitted to widen the scope of uses.

Laser cutting today

Forty years after the main co2 laser engraver, laser-cutting is all over! Also, it’s not just for metals any longer: acrylic, wood (pressed wood, MDF,… ), paper, cardboard, material, earthenware. Lasers presently have great quality and high-exactness pillars which can slice through materials thick up to 20 mm, with a perfect and thin kerf, and no compelling reason to resize or clean the material.

Industry remains the greatest purchaser. Vehicle organizations particularly, however lasers are likewise utilized to make sun-oriented boards by cutting photovoltaic cells in silicon chunks, or to penetrate openings in the sharp edges of turbines so as to cool aviation developments. Etching objects, for instance letters on consoles, the brand in favor of your telephone or your pen, is likewise an incessant use for lasers. Matched with 3D-print, laser-cut opens up the field of conceivable outcomes in industry!

Also, laser cutting is accessible as an administration, on the web, in just a couple of snaps, anybody with a web association would now be able to profit by this innovation.

In the event that this history of laser engraver cutting has intrigued you of what is conceivable gratitude to this innovation, you can look at our materials list – for the time being, we offer 4 principle materials (acrylic, pressed wood, MDF, cardboard) with in excess of 60 mixes of sorts, thicknesses, and hues – and transfer a 2D document to get a free statement for your laser cutting undertaking!

see more:
https://en.wikipedia.org/wiki/Laser_safety

Continue reading

The Use of Laser Cutting in Sheet Metal Prototyping

Although there are several ways in which sheet metal can be shaped and cut, few are as accurate, reliable and inexpensive as laser cutting. The technology involved in laser cutting machine is so useful that a continuation, as well as improvement of their future capabilities, is inevitable.

Categories of Laser Cutting Tools

Laser cut is a flexible tool whose use can be applied in a wide spectrum of materials like stone, glass, plastic, wood, and sheet metal.

  1. CO2 laser

A CO2 laser cutter is a popular type of tool that is valued because it is easy to control and highly precise. A beam made of concentrated CO2 gas is activated by electricity to power the cut.

  1. Fiber Laser

A fiber laser uses glass fibers to enhance the potential of a seed laser. The result is a laser that is more powerful as well as more accurate than the CO2 laser cutter. A fiber laser is usually used for metals due to its focused and intense beam.

  1. Crystal Laser

A crystal laser is similar to a fiber laser, except that it uses pump diodes and crystals to generate the power of its beam. A crystal laser has a performance and application potential comparable to a fiber laser.

Benefits of Using Laser Cutting with Sheet Metal

There are numerous reasons why the use of laser cutting machine is the preferred method when developing a prototype sheet metal.

  • More Intricate

As a laser has an average size of just a few micrometers, it allows the accuracy to create and cut sheet metal prototypes that would not be possible if other methods were used. On the other hand, this results in an almost unlimited range of possibilities.

  • Finished Edge

The use of a physical technique like a blade, to cut metal sheets produces imperfections, such as roughness and burrs, along with the edge. For a lot of designs, these would need to be buffed out or otherwise eliminated which may increase the time it takes for the end user to get their product. The use of a laser eliminates this problem.

  • Scalability

The tools allow companies to cut as many or as few sheet metal prototypes as their customers want. In general, these lasers do not have to be adjusted or reconditioned to fit the design of a certain part. When adjustments are unavoidable, they are easier to perform when you use a laser cutter. Check here.

Laser Cutting and the Future

As of right now, CO2 laser cutters are still the industry standard, although fiber lasers are being rapidly adopted. Even though it is quite new, it is projected that fiber laser technology will become standard in the next 10 to 12 years. Several companies will continue to use their CO2 laser cutter along with their fiber lasers, providing them with more design options they can provide their customers. In addition, it could be combined with 3D printing to create accurate and reliable products for customers.…

Continue reading

The different techniques of laser cutting

There are several different machine tools for cutting metal plates. The most important techniques are plasma, water jet or laser. Each technique has specific advantages, depending on the application. However, when it comes to cutting sculpted contours and precise shapes, laser cutting represents the best solution. It also provides a good alternative to milling. Below, we will find out more about the different types of techniques that you can use in a laser engraver machine.

  • First, let’s understand the main advantages of laser cutting:
  • minimum thermal effort
  • very precise shapes, even in thicker material
  • precise cut
  • excellent repeatability thanks to the fact that there is no wear on the cutting tool
  • easy reanalysis

The different techniques of laser cutting

Beveling

With regard to bevelling, CO2 laser engraver and fiber cutting are both more accurate than plasma jet cutting, and faster than milling. A good CO2 laser engraver, for example, allows you to bevel ends up to 40 mm – the perfect solution for cutting steel sheets, for example.

Complex shapes and very small grooves

A good CO2 laser engraver enables you to cut complex shapes and reduced grooves up to a fraction of a millimeter.

Make sure you know the differences before picking your machine

When you have to opt for a laser engraver, it is essential to receive adequate support through the advice and experience of the specialists. What is your opinion regarding the integration of laser equipment into your machine? Is it supplied with the appropriate machining software and meets all cutting requirements for a wide range of materials? And why not set it and calibrate it? If it is starting from scratch, we recommend that you contact a qualified technician.

High Speed Recording / Marking

A laser machine that marks, engraves and cuts. It does not require two machines or transfer parts between them, and this inherent versatility further reduces costs per part.

Non-Metallic Materials

The laser engraver is ideal for cutting wood, plastic and Perspex. Provides a superb finish of Perspex ends, cuts plywood and can be used to punch paper and cardboard. As a versatile and economical method, laser cutting represents an excellent solution for suppliers in the communications and advertising industries. Learn more.

Simple re-updating

It is easy to achieve greater productivity with older or specialized machines by adding loading solutions, simply replace the laser system. The availability of ready-to-use solutions means you do not need to create your own configuration from multiple products. Dealing with any laser engraver is usually quite simple, so all you need to figure out is the kind of machine you need.

The alternative to milling: oxide-free cutting

The co2 laser engraver cut cleanly without leaving oxides of residue on the work piece. For this reason, the use of a co2 laser engraver is an excellent alternative to milling in stainless steel parts that require an exceptional finish. Given the additional productivity resulting from its speed, it makes sense to seek advice on the pros and cons of laser cutting as an alternative to milling.…

Continue reading

Avoiding burn marks/smudges when engraving acrylic

Burn marks and laser cutting go hand in hand – you are cutting with a highly focused beam of light after all. Even so there are some tips and tricks to minimize this issue for different materials. Here we are going to focus on acrylic.

Solution

Most of the acrylic you will buy comes with a protective paper on both sides. It is possible for you to leave this paper on the acrylic while you laser cut you design. In our experience doing this does not interfere with the quality of the engraving at all. The biggest pitfall of this method is that you will need to peel the paper off both sides of your acrylic after you laser cut it, which can be extremely time consuming depending on how much cutting you and removing the paper can be fairly tricky depending on the complexity of your design.

Tips

As a rule: cut with paper on both sides if there is no raster engraving in the design, or if there is only heavy raster engraving. Heavy raster engravings will have no trouble burning through the paper.  Neither will heavy or medium vector engraving. However if the file has medium or light raster engraving you should remove the protective paper from your acrylic unless you have tested out that design in particular to find out if you can in fact leave the paper on.

Cutting

If you leave the paper on for a cut through acrylic you will see that the leaving the paper on produces a cut that appears much more clean that if you were to take the protective paper off the acrylic. Normally a cut can and will leave smudgy burn marks on the inside of your cuts. Which it may not be eliminated completely, these marks will be greatly reduced if you leave the paper on your acrylic while cutting.

Heavy Raster Engraving

If you leave the protective paper on while engraving you will notice that the paper produces a crisper result compared to engraving with the paper. The vaporized acrylic builds up around the outside of the letters when the paper is not use and produces this slightly ‘inflated’ look. This would probably polish off should you have the desire to do so.

Medium Raster Engraving

Again leaving on the protective paper and simply engraving through it will leave the design looking more crisp that if you were to remove the paper. However with medium raster you may have some sticky residue left over from the adhesive of the paper as it may not be as thoroughly burned as it will be from a heavy raster engraving.

So what does all this mean?

If you want to reduce some of the burning on your acrylic or get better and crisper engravings then simply leave the protective paper on while you cut or engrave it. However be sure to still remove the paper for some medium and basically all light raster engravings.…

Continue reading

Getting More Value for Money with a Laser Cutter Machine

Laser Cutter

Using a laser cutter machine has become highly popular and a lot easier than you might think. Laser cutters are useful machines and certainly something which thousands are turning to each and every day. However, will these machines really offer you what you need? Are they really good value for money? Read on to find out a little more about laser cutter machines today.

You Must Have a Workshop for the Machine

First of all, laser cutters can have a lot of debris flying around and there probably will be a lot of fumes hanging around too which can be a real issue to say the least. When you are using a laser cutter you are best setting up a nice and spacious room. Laser cutters are easy enough to use but at the same time you want to get plenty of ventilation so that you don’t get overcome by the fumes. If you are using this in your apartment or in a small room, always open the doors and windows and take breaks. This will be highly important and something that will be useful especially when it comes to keeping safe and sound at all times.

Always Get In Some Practice

How good are you at using laser cutters? Despite what you might think, these machines are easy enough to use but only when you know what you’re doing. That is why you need to think about taking a few days to put in some hours of practice. Again, practice might not seem overly necessary and yet it can be very important. Having practice enables you to get used to the laser cutter machine and understand how it should be used correctly. What is more, when you put in the practice, you can gain a lot more experience and skill! This will prove a real hit and really it’s something that will help.

Renting Is More Cost Effective

Buying outright might seem better simply because once you pay for the machine, it’s yours and you don’t have to worry about it but it’s not always that straightforward. For example, buying a laser cutter can cost tens of thousands of dollars which might be too costly for some people. However, if you were to instead rent the machine, it could be a lot less costly. You don’t have to rent long-term if you don’t want to but if you’re only planning to use it for a short time, it’s better to rent or pay per hour for use at a maker space facility.  Also, if you do decide to buy read reviews of the laser cutter company.  Here’s where you can read Boss’ BBB reviews:  https://www.bbb.org/central-florida/business-reviews/lasers/boss-laser-in-sanford-fl-90314519.

Use with Ease

It has never been easier to get your hands on a laser cutting machine and it’s truly a simple machine that shouldn’t get you into too much trouble. You are absolutely going to love how the cutter is to use and really with a bit of practice you shouldn’t find it’s too difficult to use. It has never been easier to use a laser cutting machine and there are a dozen different things you can use it for too. A laser cutter machine is a nice tool for most people and it’s incredibly easier to use.…

Continue reading

Today’s Laser Engraving Machine For Small Businesses

Laser Cutter

Designed to meet the market demand for more compact laser equipment with small work areas and medium-sized, yet powerful laser machines, there are many options for those looking for a brand new laser cutter machine, since it is an example of versatility, quality and reliability in laser systems.  Precisely because of its versatility, the laser cutter machine can be specially equipped for cutting, engraving and drilling applications applied to materials such as plastic, metal and wood, always achieving excellent results.

This latest system (fiber laser cutting machine) allows for minimum positioning speeds, while maintaining unmatched quality and cutting efficiency, engraving, and drilling. All laser equipment produced by different companies all over the world are usually very good, not changing so much one from another.  They are equipped with new computerized numerical and interface software capable of performing the most complex 2D geometric designs.  A laser engraver machine is much more than a machine, it is considered a true asset to any company that would like to spend less cash and get much more money in return.

For technical data on this laser cutter and engraving machine keep on reading

With the increase of competitiveness in the globalized market, the technology has undergone many advances.  The companies seek to keep their machinery updated, to increase their quality, productivity, competitiveness, and add value to their final product.  It is in this search for the best technology that fit fiber laser cutting machine cutting, engraving or laser cutting machines all over the world. Read the news coming from http://www.surfacefinishing.com/doc/evs-metal-inc-acquires-amada-lcg-aj-series-fiber-laser-jersey-fabrication-facility-0001

Therefore, cutting, engraving or laser drilling machines are tools of the highest importance in industrial production.  In fact find laser engravers here at Boss. The ability to perform work with innovative designs and shapes in various materials with speed and final quality, shows that laser machines are indispensable in various sectors of the market.

Why spend cash on a laser cutter

fiber laser cutting machineThe laser machine fiber laser cutting machine was created to meet the constant demand for more versatile laser cutting and engraving machines, with medium and large work areas, but with great power. A plus is an example of the versatility, quality and reliability of the laser systems, with an excellent cost/benefit ratio. It is very important that companies from all over the world verify the importance of said machines and allow some money on them. They will definitely not regret making such a decision, after all this investment can mean extra millions at the end of the year. If you are ready to try, all you have to do is Google and look for places that sell this kind of product. All countries all over the world already have such technology available. continue reading..

With the machines, we have achieved our goal of creating an automatic laser machine for versatile cutting, engraving and drilling, with an intermediate work area that can handle the various sectors.

Thanks to its extreme ability, the fiber laser cutting machine can be specially equipped for the cutting, engraving or drilling of plastic materials, metals or wood, always with an excellent result.…

Continue reading