Home » Posts tagged fiber laser cutting machine

CO2 Laser Engraver Safety

From the main laser engraver (and their precursors the MASERs) to the present laser cutting, there’s a significant intriguing history of preliminaries and blunders, rejection and disclosures. To comprehend somewhat better what’s behind our new laser cutting administration, take this recorded voyage with us.

From MASERs to co2 laser engraver

Amid World War II, the physicist Charles Townes worked at the Bell Laboratories on the radar helped shelling frameworks and microwaves generators. During the 50’s, after an Einstein hypothesis, invigorated outflow, where vitality is removed from a progress in a particle or atom, Townes pondered making a photon motion, all similar, because of the enhancement of an attractive wave.

That is the way he made the main gadget, called Microwaves Amplification by Stimulated Emission of Radiation, for example “MASER”. Masers were unobtrusively helpful, for logical research essentially however less for military or modern applications. Just a couple of researchers figured an infrared maser may be significant.

The employments of laser cutting, at that point and now

The Western Engineering Research Center, in Buffalo, USA, was the absolute initial one to utilize a laser as a cutting gadget. As of now, jewel kicks the bucket were utilized to produce wire for electrical associations. Thousands of kicks the bucket were required for this sort of activities, and penetrating the bites the dust or resizing them was both an expensive and a moderate procedure, as long as 24 hours of making.

Rather than metal drill or jewel dust, utilized up until this point, engineers utilized a laser. Huge numbers of the directed tests were wellbeing trying. The impacts of laser bars on eyes and skin, or of the vaporized materials on the specialist’s wellbeing had not yet been built up.

Gas helped laser cutting, and particularly co2 laser engraver cutting implied an expanded productivity, which permitted to widen the scope of uses.

Laser cutting today

Forty years after the main co2 laser engraver, laser-cutting is all over! Also, it’s not just for metals any longer: acrylic, wood (pressed wood, MDF,… ), paper, cardboard, material, earthenware. Lasers presently have great quality and high-exactness pillars which can slice through materials thick up to 20 mm, with a perfect and thin kerf, and no compelling reason to resize or clean the material.

Industry remains the greatest purchaser. Vehicle organizations particularly, however lasers are likewise utilized to make sun-oriented boards by cutting photovoltaic cells in silicon chunks, or to penetrate openings in the sharp edges of turbines so as to cool aviation developments. Etching objects, for instance letters on consoles, the brand in favor of your telephone or your pen, is likewise an incessant use for lasers. Matched with 3D-print, laser-cut opens up the field of conceivable outcomes in industry!

Also, laser cutting is accessible as an administration, on the web, in just a couple of snaps, anybody with a web association would now be able to profit by this innovation.

In the event that this history of laser engraver cutting has intrigued you of what is conceivable gratitude to this innovation, you can look at our materials list – for the time being, we offer 4 principle materials (acrylic, pressed wood, MDF, cardboard) with in excess of 60 mixes of sorts, thicknesses, and hues – and transfer a 2D document to get a free statement for your laser cutting undertaking!

see more:
https://en.wikipedia.org/wiki/Laser_safety

Continue reading

The Use of Laser Cutting in Sheet Metal Prototyping

Although there are several ways in which sheet metal can be shaped and cut, few are as accurate, reliable and inexpensive as laser cutting. The technology involved in laser cutting machine is so useful that a continuation, as well as improvement of their future capabilities, is inevitable.

Categories of Laser Cutting Tools

Laser cut is a flexible tool whose use can be applied in a wide spectrum of materials like stone, glass, plastic, wood, and sheet metal.

  1. CO2 laser

A CO2 laser cutter is a popular type of tool that is valued because it is easy to control and highly precise. A beam made of concentrated CO2 gas is activated by electricity to power the cut.

  1. Fiber Laser

A fiber laser uses glass fibers to enhance the potential of a seed laser. The result is a laser that is more powerful as well as more accurate than the CO2 laser cutter. A fiber laser is usually used for metals due to its focused and intense beam.

  1. Crystal Laser

A crystal laser is similar to a fiber laser, except that it uses pump diodes and crystals to generate the power of its beam. A crystal laser has a performance and application potential comparable to a fiber laser.

Benefits of Using Laser Cutting with Sheet Metal

There are numerous reasons why the use of laser cutting machine is the preferred method when developing a prototype sheet metal.

  • More Intricate

As a laser has an average size of just a few micrometers, it allows the accuracy to create and cut sheet metal prototypes that would not be possible if other methods were used. On the other hand, this results in an almost unlimited range of possibilities.

  • Finished Edge

The use of a physical technique like a blade, to cut metal sheets produces imperfections, such as roughness and burrs, along with the edge. For a lot of designs, these would need to be buffed out or otherwise eliminated which may increase the time it takes for the end user to get their product. The use of a laser eliminates this problem.

  • Scalability

The tools allow companies to cut as many or as few sheet metal prototypes as their customers want. In general, these lasers do not have to be adjusted or reconditioned to fit the design of a certain part. When adjustments are unavoidable, they are easier to perform when you use a laser cutter. Check here.

Laser Cutting and the Future

As of right now, CO2 laser cutters are still the industry standard, although fiber lasers are being rapidly adopted. Even though it is quite new, it is projected that fiber laser technology will become standard in the next 10 to 12 years. Several companies will continue to use their CO2 laser cutter along with their fiber lasers, providing them with more design options they can provide their customers. In addition, it could be combined with 3D printing to create accurate and reliable products for customers.…

Continue reading

Avoiding burn marks/smudges when engraving acrylic

Burn marks and laser cutting go hand in hand – you are cutting with a highly focused beam of light after all. Even so there are some tips and tricks to minimize this issue for different materials. Here we are going to focus on acrylic.

Solution

Most of the acrylic you will buy comes with a protective paper on both sides. It is possible for you to leave this paper on the acrylic while you laser cut you design. In our experience doing this does not interfere with the quality of the engraving at all. The biggest pitfall of this method is that you will need to peel the paper off both sides of your acrylic after you laser cut it, which can be extremely time consuming depending on how much cutting you and removing the paper can be fairly tricky depending on the complexity of your design.

Tips

As a rule: cut with paper on both sides if there is no raster engraving in the design, or if there is only heavy raster engraving. Heavy raster engravings will have no trouble burning through the paper.  Neither will heavy or medium vector engraving. However if the file has medium or light raster engraving you should remove the protective paper from your acrylic unless you have tested out that design in particular to find out if you can in fact leave the paper on.

Cutting

If you leave the paper on for a cut through acrylic you will see that the leaving the paper on produces a cut that appears much more clean that if you were to take the protective paper off the acrylic. Normally a cut can and will leave smudgy burn marks on the inside of your cuts. Which it may not be eliminated completely, these marks will be greatly reduced if you leave the paper on your acrylic while cutting.

Heavy Raster Engraving

If you leave the protective paper on while engraving you will notice that the paper produces a crisper result compared to engraving with the paper. The vaporized acrylic builds up around the outside of the letters when the paper is not use and produces this slightly ‘inflated’ look. This would probably polish off should you have the desire to do so.

Medium Raster Engraving

Again leaving on the protective paper and simply engraving through it will leave the design looking more crisp that if you were to remove the paper. However with medium raster you may have some sticky residue left over from the adhesive of the paper as it may not be as thoroughly burned as it will be from a heavy raster engraving.

So what does all this mean?

If you want to reduce some of the burning on your acrylic or get better and crisper engravings then simply leave the protective paper on while you cut or engrave it. However be sure to still remove the paper for some medium and basically all light raster engravings.…

Continue reading

Engraving Machines – A Lot Less Expensive Today

Engraving Machines

For most people, when we talk about laser cutting, we soon think of something expensive and inaccessible to small businesses. But it turns out that a new generation of low-cost machines are going strong in the market. How about we take a look at this technology? It is really affordable to find laser cutter machine that are good and fit for businesses of all sorts and sizes. If you need new technology and some extra cash at the end of the month then this definitely is for you.

What is laser cutting?

The laser cut is nothing more than a CNC system coupled to a laser emitter. As the emitter has a certain size it is not directly connected to the head of the CNC. In fact, in the head is only a mirror that captures the laser beam and concentrates the ray. This is available in all sorts of laser cutter machine.

A 40 w laser is capable of cutting multiple sheets of paper at the same time and up to other materials such as MDF (about 10 mm, acrylic or thin metal parts.

In heavy industry has laser of all that is power, cutting very thick materials. But let’s focus on those small machines, 40 w or more, that are very accessible to small business owners looking for an opportunity to get an affordable laser cutter.

Laser cutting operation

As the ancients would say, a picture is worth a thousand words! visit us now!

That’s why I preferred to show a machine like that by cutting pieces of paper. The machine used here is unimportant. The important thing here is to know that these machines take the vector files of Corel Draw and transform it into a way for the laser to make the cut. With small adjustments you can regulate the power of the laser to just mark the material or to make the cut by the laser cutter.

Other uses for the laser

Engraving MachinesBut having a laser just to cut paper can be a waste of time and money. Such a machine allows gains in several areas where the chart is already fit, but other people are not. And what else can we do with these machines?

One of the market that caught my attention for these machines was the craft. It uses laser to make cutouts in MDF, paint stencils (molds), wood engraving, plastic (care that gases can be toxic and need a good exhaust), metal or other materials and more. Read more info coming from http://www.nbcnews.com/mach/technology/universal-basic-income-answer-automated-future-n692801

In the area of ​​signage and marquee we can use these machines to make acrylic cut, making letters and figures complex, many of them difficult to be made with other types of router. It is good to remember that the machine regulates the intensity of the laser, allowing both cutting Such as roughing or even just burning or heating the material. Therefore investing in a laser cutter is indeed a good idea, even for the small business across the world. Are you ready to invest little cash and get tons in return?  I like  Epilog Laser cutters but if you want to buy direct from China and go cheap be careful!  I’ve read some bad forum reports on China made laser cutters.  Here’s a Bodor review for example.  Its your choice and the risk to buy cheap usually doesnt pay off.…

Continue reading

Today’s Laser Engraving Machine For Small Businesses

Laser Cutter

Designed to meet the market demand for more compact laser equipment with small work areas and medium-sized, yet powerful laser machines, there are many options for those looking for a brand new laser cutter machine, since it is an example of versatility, quality and reliability in laser systems.  Precisely because of its versatility, the laser cutter machine can be specially equipped for cutting, engraving and drilling applications applied to materials such as plastic, metal and wood, always achieving excellent results.

This latest system (fiber laser cutting machine) allows for minimum positioning speeds, while maintaining unmatched quality and cutting efficiency, engraving, and drilling. All laser equipment produced by different companies all over the world are usually very good, not changing so much one from another.  They are equipped with new computerized numerical and interface software capable of performing the most complex 2D geometric designs.  A laser engraver machine is much more than a machine, it is considered a true asset to any company that would like to spend less cash and get much more money in return.

For technical data on this laser cutter and engraving machine keep on reading

With the increase of competitiveness in the globalized market, the technology has undergone many advances.  The companies seek to keep their machinery updated, to increase their quality, productivity, competitiveness, and add value to their final product.  It is in this search for the best technology that fit fiber laser cutting machine cutting, engraving or laser cutting machines all over the world. Read the news coming from http://www.surfacefinishing.com/doc/evs-metal-inc-acquires-amada-lcg-aj-series-fiber-laser-jersey-fabrication-facility-0001

Therefore, cutting, engraving or laser drilling machines are tools of the highest importance in industrial production.  In fact find laser engravers here at Boss. The ability to perform work with innovative designs and shapes in various materials with speed and final quality, shows that laser machines are indispensable in various sectors of the market.

Why spend cash on a laser cutter

fiber laser cutting machineThe laser machine fiber laser cutting machine was created to meet the constant demand for more versatile laser cutting and engraving machines, with medium and large work areas, but with great power. A plus is an example of the versatility, quality and reliability of the laser systems, with an excellent cost/benefit ratio. It is very important that companies from all over the world verify the importance of said machines and allow some money on them. They will definitely not regret making such a decision, after all this investment can mean extra millions at the end of the year. If you are ready to try, all you have to do is Google and look for places that sell this kind of product. All countries all over the world already have such technology available. continue reading..

With the machines, we have achieved our goal of creating an automatic laser machine for versatile cutting, engraving and drilling, with an intermediate work area that can handle the various sectors.

Thanks to its extreme ability, the fiber laser cutting machine can be specially equipped for the cutting, engraving or drilling of plastic materials, metals or wood, always with an excellent result.…

Continue reading