Home » Posts tagged co2 laser cutter

CO2 Laser Engraver Safety

From the main laser engraver (and their precursors the MASERs) to the present laser cutting, there’s a significant intriguing history of preliminaries and blunders, rejection and disclosures. To comprehend somewhat better what’s behind our new laser cutting administration, take this recorded voyage with us.

From MASERs to co2 laser engraver

Amid World War II, the physicist Charles Townes worked at the Bell Laboratories on the radar helped shelling frameworks and microwaves generators. During the 50’s, after an Einstein hypothesis, invigorated outflow, where vitality is removed from a progress in a particle or atom, Townes pondered making a photon motion, all similar, because of the enhancement of an attractive wave.

That is the way he made the main gadget, called Microwaves Amplification by Stimulated Emission of Radiation, for example “MASER”. Masers were unobtrusively helpful, for logical research essentially however less for military or modern applications. Just a couple of researchers figured an infrared maser may be significant.

The employments of laser cutting, at that point and now

The Western Engineering Research Center, in Buffalo, USA, was the absolute initial one to utilize a laser as a cutting gadget. As of now, jewel kicks the bucket were utilized to produce wire for electrical associations. Thousands of kicks the bucket were required for this sort of activities, and penetrating the bites the dust or resizing them was both an expensive and a moderate procedure, as long as 24 hours of making.

Rather than metal drill or jewel dust, utilized up until this point, engineers utilized a laser. Huge numbers of the directed tests were wellbeing trying. The impacts of laser bars on eyes and skin, or of the vaporized materials on the specialist’s wellbeing had not yet been built up.

Gas helped laser cutting, and particularly co2 laser engraver cutting implied an expanded productivity, which permitted to widen the scope of uses.

Laser cutting today

Forty years after the main co2 laser engraver, laser-cutting is all over! Also, it’s not just for metals any longer: acrylic, wood (pressed wood, MDF,… ), paper, cardboard, material, earthenware. Lasers presently have great quality and high-exactness pillars which can slice through materials thick up to 20 mm, with a perfect and thin kerf, and no compelling reason to resize or clean the material.

Industry remains the greatest purchaser. Vehicle organizations particularly, however lasers are likewise utilized to make sun-oriented boards by cutting photovoltaic cells in silicon chunks, or to penetrate openings in the sharp edges of turbines so as to cool aviation developments. Etching objects, for instance letters on consoles, the brand in favor of your telephone or your pen, is likewise an incessant use for lasers. Matched with 3D-print, laser-cut opens up the field of conceivable outcomes in industry!

Also, laser cutting is accessible as an administration, on the web, in just a couple of snaps, anybody with a web association would now be able to profit by this innovation.

In the event that this history of laser engraver cutting has intrigued you of what is conceivable gratitude to this innovation, you can look at our materials list – for the time being, we offer 4 principle materials (acrylic, pressed wood, MDF, cardboard) with in excess of 60 mixes of sorts, thicknesses, and hues – and transfer a 2D document to get a free statement for your laser cutting undertaking!

see more:
https://en.wikipedia.org/wiki/Laser_safety

Continue reading

Avoiding burn marks/smudges when engraving acrylic

Burn marks and laser cutting go hand in hand – you are cutting with a highly focused beam of light after all. Even so there are some tips and tricks to minimize this issue for different materials. Here we are going to focus on acrylic.

Solution

Most of the acrylic you will buy comes with a protective paper on both sides. It is possible for you to leave this paper on the acrylic while you laser cut you design. In our experience doing this does not interfere with the quality of the engraving at all. The biggest pitfall of this method is that you will need to peel the paper off both sides of your acrylic after you laser cut it, which can be extremely time consuming depending on how much cutting you and removing the paper can be fairly tricky depending on the complexity of your design.

Tips

As a rule: cut with paper on both sides if there is no raster engraving in the design, or if there is only heavy raster engraving. Heavy raster engravings will have no trouble burning through the paper.  Neither will heavy or medium vector engraving. However if the file has medium or light raster engraving you should remove the protective paper from your acrylic unless you have tested out that design in particular to find out if you can in fact leave the paper on.

Cutting

If you leave the paper on for a cut through acrylic you will see that the leaving the paper on produces a cut that appears much more clean that if you were to take the protective paper off the acrylic. Normally a cut can and will leave smudgy burn marks on the inside of your cuts. Which it may not be eliminated completely, these marks will be greatly reduced if you leave the paper on your acrylic while cutting.

Heavy Raster Engraving

If you leave the protective paper on while engraving you will notice that the paper produces a crisper result compared to engraving with the paper. The vaporized acrylic builds up around the outside of the letters when the paper is not use and produces this slightly ‘inflated’ look. This would probably polish off should you have the desire to do so.

Medium Raster Engraving

Again leaving on the protective paper and simply engraving through it will leave the design looking more crisp that if you were to remove the paper. However with medium raster you may have some sticky residue left over from the adhesive of the paper as it may not be as thoroughly burned as it will be from a heavy raster engraving.

So what does all this mean?

If you want to reduce some of the burning on your acrylic or get better and crisper engravings then simply leave the protective paper on while you cut or engrave it. However be sure to still remove the paper for some medium and basically all light raster engravings.…

Continue reading